DESCRIPTION
The Compact Top2 (Top Labeler)
applies labels to the top of a product that
can be laid down on a conveyor this could be a carton, a sheet
of paper, a block of cheese or a jar lid. The Top2
indicates 2 heads; the machine
can be fitted with one head. The machine can be operated in
an existing line or as a Stand-alone unit , the machine shown
in the image to the right is fitted with motorized cross-feed
.
EXAMPLE APPLICATIONS
- Carton Labeling (Shippers to PC Software cartons)
- Product/Jar/Bottle lids
- Pun net Lids - Clamshell packs
- Sheet or Leaflet labeling with the addition of a Sheet
Feeder for auto feeding
- CD - DVD Labelling
PROCESS
The standard machine consists of a 2 . 0 M x 900mm high conveyor using a belt 200mm wide . On pressing Run the conveyor starts, the products are placed onto the conveyor manually and travel until the label/s are applied. With two labeling heads, two labels can be applied on one product or the machine can be placed into tandem mode where one label is set in both labeling heads and the machine operates non-stop. The machine can be fitted with many options as listed below, such as vacuum for holding down thin product, motorized cross-feed for frequent setup changes.
SPECIFICATIONS
| Conveyor Length |
from 2000 mm |
Conveyor Height |
900mm |
| Belt width |
200mm (50mm to 400mm) |
| Overall Dim' |
W2000xD700xH 2000 |
| Power Requirements |
240V |
| Label Roll Diameter |
380mm - 76 Core |
Product Size |
Min' 20mm x 20 mm |
| Label Size |
Min' 12mm x 12mm |
| Label Height |
Max' 180mm - Opt' 250mm |
| Label Length |
Max' 800mm |
| Throughput |
up to 400 per minute* |
* Product & Label Dependent
FEATURE LIST
- Uses the reliable Compact Labelling
Head and controller
- Full Synchronised speeds - incorporating German Stepper Motors on the labeling heads and AC Brushless motors on all other drives
- Robust, heavy duty construction - the machine is designed for years of trouble free and maintenance free productivity. No lubrication or awkward adjustments are required
- Easy to set up - within a couple of minutes a new job can be set up and running, increasing productivity immediately
- Simple to Operate with the build it alarms and Compact controller
- Economical design incorporating high reliability and low maintenance
OPTIONAL LIST
- Capacitance
Scanner- for detecting Clear labels
- Additional sensors will allow Tandem (Non-Stop) operation
- Conveyor Lengths - 2.5 M, 3.0M, 3. 5 M, 4. 0 M
- Conveyor Belt Widths - 50mm to 400mm
- Hot
Foil Printer or Thermal
Printer - for printing use by/batch codes or
bar codes
- Motorized Rewind Units - using AC Brushless motors for no maintenance to rewind full roll of backing paper
- Vacuum hold down belt
- Blow-on attachments
- Sheet Feeder for paper to CD feeding
- Numerous restacking devices, e.g. Egg
Carton Labeler
|
